HOW-TO > PROJECT TIPS > Thompson's® WaterSeal® Waterproofer Plus Tinted Wood Protector
- Do not mix with other types of waterproofing products; variations in the final appearance of the surface being treated may result.
- Do not thin.
- Shake well - intermix all cans (of the same color) to be used to assure color uniformity.
- A small trial patch should be tried before application over the entire surface.
- Only one light coat is necessary in most applications; however, a second coat may be applied if darker color is desired (apply approximately 12 hours after completing the first coat).
- Apply by brush, roller, dipping, or sprayer. A garden "pump-up" style sprayer is the simplest method. Regardless of which application method used, remove puddles within 15 minutes by redistributing to dry areas or wiping off.
- Use only with adequate ventilation.
- Oiliness and tackiness will result if over-applied or applied to wet or damp surface. May also occur after application if overnight temperature falls below 50° F within 48 hours of application.
- IMPORTANT: Place rags, steel wool, and waste immediately after use in a sealed water-filled metal container.
